Municipal and Architecture
It can produce curb stones (side stones and flat stones), boundary blocks, U-shaped reinforced concrete prefabricated ditches (grooved, flat, socket type), fiber concrete ditch cover plates (flat plates, slit type plates), assembled inspection well blocks, manhole covers, retaining wall blocks, wall blocks (self-locking, dry masonry, mortar masonry), permeable bricks, load-bearing bricks, blind guide bricks, stop bricks, load-bearing building hollow blocks (can be equipped with imitation stone splitting exterior decorative surface). The surface treatment of floor tiles can be selected from sandblasting, washing, and water grinding, imitating stone embossing, galling, and splitting; retaining wall blocks and building hollow blocks can be split, embossed, and sandblasting; it can imitate granite, sandstone, gneiss, marble, coarse wood grain, etc.; it uses German Baylor inorganic color pigments, which are bright and do not fade. Compressive strength, flexural strength, water permeability, wear resistance, etc. comply with corresponding national product standards, and products supplied to Hong Kong and Macao comply with local standards.
  • Dutch Brick Hong Kong Kwun Tong
  • Dutch Brick Guangzhou Peizheng Primary School
  • Dutch Brick Shenzhen Dongbin Road
  • Scallop-shaped Shenzhen Dongbin Road
  • Guangzhou station
  • Shenzhen Bay Port
  • Jiangmen Bus Station
  • Hong Kong Sha Tin Bus Station
  • Commonly used colors are dirty resistant
  • Commonly used color water permeability thickness 80mm
  • For special-shaped parquet
  • Grass planting bricks for parking lots are 80mm thick
  • Rectangular 600×300×80mm
  • Square can be parcelled
  • Pervious brick thickness standard 80mm
  • Pebble inlaid washing
permeable bricks

Pervious bricks: Compressive strength according to GB/T 25993-2010 "Pervious pavement bricks and permeable waterway panels": sidewalk/pedestrian street: average value ≥40MPa, minimum value of single block ≥35MPa; Square/parking lot: average value ≥ 50MPa, minimum value of single block ≥ 42MPa; flexural strength: sidewalk/pedestrian street: average value ≥ 5MPa, minimum value of single block ≥4.2MPa; square/parking lot: average value ≥ 6MPa, minimum value of single block ≥ 5MPa; water permeability coefficient: ≥1.0×10 ² cm/s (i.e. 0.1mm/s); wear resistance: wear pit length ≤35 mm.

Curb stone·Retaining wall

Code for Construction and Quality Acceptance of Urban Road Engineering (CJJ 1-2008), Code for Design of Hydraulic Retaining Walls (NB/T11089-2023)

standard swatches
  • White 0001 white cement #F5F5F5 RGB:245、245、245
  • Yellow 4920 white cement #E29D50 RGB:226、157、80
  • Red 4110 white cement #E05141 RGB:224、81、65
  • Red 4140 white cement #B05F5B RGB:176、95、91
  • Yellow 4960 white cement #DC744F RGB:220、116、79
  • Red 4180 white cement #B17776 RGB:177、119、118
  • Brown 4610 white cement #A05B4C RGB: 160、91、76
  • Brown 4686 white cement #805A51 RGB:128、90、81
  • Black 4330/3 white cement #5B5B5B RGB:91、91、91
  • Ash 0000 Ash cement #ADADAD RGB:173、173、173
  • Yellow 4920 grey cement #AE8C5E RGB:174、140、94
  • Red 4110 grey cement #BA5448 RGB:186、84、72
  • Red 4140 grey cement #9A574F RGB:154、87、79
  • Yellow 4960 grey cement #A6664B RGB:166、102、75
  • Red 4180 grey cement #8C6462 RGB:140、100、98
  • Brown 4610 grey cement #8E554A RGB:142、85、74
  • Brown 4686 gray cement #745249 RGB:116、82、73
  • Black 4330/3 gray cement #525252 RGB:82、82、82